Power that fits
- Single-phase 1.4–7.4 kW, three-phase up to 22 kW per output
- Type 2 socket, with or without shutter, or tethered cable
- Solar charging compatible
Smart EV charging that grows with you.
From a 7 kW home wallbox to a dual 22 kW commercial charger, NovaOasis — EV Charging delivers safe, connected and billing-ready charging on one platform.
Oasis One Flow
Up to 22 kW at home, with phase balancing and solar charging.
22 kWmaximum output
- Outputs
- 1 output
- Display
- LED display
- Metering
- MID certified, ±0.5%
- Load balancing
- Up to 5 chargers
A three-phase home, or one with solar panels on the roof.
Two families, nine chargers
Every model shares the same protection, connectivity and 5-year warranty. Higher tiers add certified metering, phase balancing and multi-layer load control.
| Feature |  Oasis OneResidential |  Oasis One SmartResidential |  Oasis One FlowResidential |  Oasis One CoreCommercial |  Oasis One ProCommercial |  Oasis One UltraCommercial |
|---|---|---|---|---|---|---|
| Power | 1.4–7 kW | 1.4–7 kW | 1.4–22 kW | 1.4–22 kW | 1.4–22 kW | 1.4–22 kW |
| Socket or tethered cable | Optional | Optional | Optional | Optional | Optional | Optional |
| Integrated MID meter (±0.5%) | No | Yes | Yes | Yes | Yes | Yes |
| ISO 15118 | No | Yes | Yes | Yes | Yes | Yes |
| Display | None | LED display | LED display | LED display | LED display | 5″ touch screen |
| Internal MCB | Yes | Yes | Yes | Yes | Yes | Yes |
| Phase balancing | No | No | Yes | Yes | Yes | Yes |
| Multi-layer load balancing | No | No | No | Yes | Yes | Yes |
| Chargers per DLB group | 5 | 5 | 5 | Unlimited | Unlimited | Unlimited |
| Chip | MCU | MCU | MCU | MCU | SoC | SoC |
| Warranty | 5 years | 5 years | 5 years | 5 years | 5 years | 5 years |
Oasis One series, single socket. Single-phase 1.4–7.4 kW or three-phase up to 22 kW.
Built in, built safe, built to last
What you get in every Oasis Charger.
Always connected
- 2 × Ethernet, Wi-Fi, 4G and Bluetooth
- LoRa for local communication
- Local OCPP 1.6-J and 2.0.1
- ISO 15118 ready
Safe by design
- Built-in RCD: 30 mA AC plus 6 mA DC detection
- Overload, over/undervoltage, temperature, relay welding and PEN fault protection
- IP65, IK10, overvoltage category III
Every kWh counts
- Built-in energy meter with ±0.5% accuracy
- MID certified for transparent billing
- Optional built-in payment terminal on Twin models
Easy to use
- Start by Plug & Play, RFID or app
- LED indicators, LED displays or touch screens
- Real-time charging data
Simple to manage
- Remote management by app and web
- Cloud monitoring and usage insights
- Fast replacement on the NFC backplate
Fast to install
- About 5 minutes per charger
- Built-in MCB and 64 A daisy chain
- Setup by NFC, Bluetooth or online pre-configuration
Made for the elements
- Works from -30 °C to +50 °C, indoors or out
- Durable design for commercial use
- 5-year warranty on every model
Smart load management
- Dynamic local and cloud load balancing
- Phase balancing across L1, L2 and L3
- Multi-layer limits for complex sites
More chargers, same connection
The Oasis platform reads your site's total demand and shares the spare capacity between chargers in real time, so you can add charging without upgrading your grid connection.
- Dynamic load balancingRuns locally and in the cloud, so it keeps working if the internet drops.
- Phase balancingSpreads load across all three phases. One Flow and above, plus every Twin model.
- Multi-layer load managementLimits at the main supply, sub-board and charger group. One Core, Pro, Ultra and Twin Pro.
- Solar chargingSolar mode charges on surplus PV power measured by the CT Link.
Oasis Meter Link
Plugs into your smart meter and needs no extra power supply. One device for P1, HAN and Kamstrup meters.
- Size
- 68 × 68 × 26 mm
- Power
- 4.15–32 V, 0.2–0.4 W
- Wireless
- Wi-Fi 2.4 GHz, BLE 4.2, LoRa 868 MHz
- Ports
- RJ45, micro USB
- Cable
- 1.5 m, extendable to 15 m
- Operating
- Indoor, -20 to +50 °C
- Warranty
- 5 years
Oasis CT Link
Clamp on, balance load, and charge on sunshine. Works on any site, with or without a smart meter.
- Size
- 77 × 36 × 65 mm
- Range
- 0–400 A via CT clamps
- Supply
- 220 V AC; TN, TT, IT
- Network
- 2 × Ethernet, Wi-Fi 2.4 GHz, BLE 4.2, LoRa 868 MHz
- Ports
- RS485, dry and wet contact, M-Bus
- Operating
- Indoor, -20 to +50 °C
- Warranty
- 5 years
Up and running in 5 minutes
The smart backplate does the slow part once. After that, fitting or swapping a charger takes minutes.
Wire the backplate
Top, bottom or rear cable entry, 2.5–10 mm² conductors. Built-in MCB and RCD mean fewer parts in the board.
Set it up
Configure by NFC or Bluetooth on site, or pre-configure online before you arrive.
Click the charger on
The charger reads its settings from the backplate's NFC tag. No laptop needed.
Go live
The charger connects over Ethernet, Wi-Fi or 4G and appears in the app and cloud platform.
~5 mininstallation per charger
64 Adaisy chain through-feed, up to 16 mm²
No rewiringto replace a unit on the same backplate
Your charger, in your pocket
The Oasis app serves drivers. The web platform serves site and fleet operators.
Four charging modes
Normal, solar, scheduled and smart.
Access control
Add or remove RFID cards and share access with family or guests.
Cable lock
Keep the cable locked to the charger to prevent theft.
Energy monitoring
Live power, session history and energy use in real time.
Remote diagnostics
Temperature, current, voltage, motion and infrared sensor data help fix issues without a site visit.
Technical specifications
Oasis AC chargers, One series and Twin series.
| Parameter | Oasis One series (single socket) | Oasis Twin series (dual socket) |
|---|---|---|
| General | ||
| Dimensions (H × W × D) | 300 × 190 × 130 mm | 400 × 288 × 125 mm |
| Certification | IEC 61851, IEC 62955, EN 50470-3 | IEC 61851, IEC 62955, EN 50470-3 |
| Operating temperature | -30 to +50 °C | -30 to +50 °C |
| Installation | Indoor / outdoor | Indoor / outdoor |
| Charging mode | Mode 3 | Mode 3 |
| Maximum altitude | 2,000 m | 2,000 m |
| EMC classification | Environment A and B | Environment A and B |
| Electrical | ||
| Rated voltage | 230 / 400 V AC (±10%) | 230 / 400 V AC (±10%) |
| Rated current | 32 A | 64 A |
| Rated frequency | 50 / 60 Hz | 50 / 60 Hz |
| Grid types | TN, IT, TT (automatic detection) | TN, IT, TT (automatic detection) |
| Charging power | 1.4–22 kW | Dual output, each 1.4–22 kW |
| Connection point | Type 2 socket (with or without shutter) or tethered cable | Type 2 socket (with or without shutter) or tethered cable |
| Wire cross-section | 2.5–10 mm² (16 mm² if daisy-chained) | 2.5–10 mm² (16 mm² if daisy-chained) |
| Glands | 3 top, 3 bottom or 2 rear, max M32 | 3 top, 3 bottom or 2 rear, max M32 |
| Protection | ||
| Ingress protection | IP65 | IP65 |
| Impact resistance | IK10 | IK10 |
| Residual current device | Integrated Type A RCD 30 mA AC + 6 mA RDC-DD | Integrated Type A RCD 30 mA AC + 6 mA RDC-DD |
| Circuit breaker | Integrated 40 A, curve C | Integrated 2 × 40 A, curve C |
| Protection class | Class I | Class I |
| Overvoltage category | III | III |
| Pollution degree | 4 | 4 |
| Surge protection (SPD) | Not listed | Optional |
| Connectivity | ||
| Communication | Wi-Fi 2.4 GHz, Bluetooth, 4G LTE, 2 × Ethernet, LoRa | Wi-Fi 2.4 GHz, Bluetooth, 4G LTE, 2 × Ethernet, LoRa |
| Authorization | RFID / app / Plug & Charge | RFID / app / Plug & Charge |
| OCPP | OCPP 1.6, OCPP 2.0.1 | OCPP 1.6, OCPP 2.0.1 |
| Status indicator | LED light strip | LED light strip |
| MID variants | ||
| Meter type | Static meter | Static meter |
| Current range | 0.25–5 (32) A | 0.25–5 (32) A |
| Accuracy class | Class C | Class C |
Downloads
Everything you need to specify, quote and sell Oasis chargers.
Plan your site with us
Tell us about your site and we'll recommend the right chargers, load balancer and layout.